Collagen Regeneration Juvelook Skinbooster

Steps for Kkeuthan Clinic's Skin Booster Layering Treatment

*1. Pre-treatment Preparation

- If necessary, cooling or numbing cream may be applied to soothe the treatment area.

Kkeuthan Clinic's 4-Step Skin Booster Layering Program

*2. 4-Step Skin Booster Layering Treatment (Using MTS or Potenza RF)

1st Layer: Skin Booster Ampoule Application

- This step involves applying a thin layer over the entire skin surface to prepare it.

- This helps to elicit the skin's natural response in the epidermal layer.

2nd Layer: Skin Booster Ampoule Application

- This process involves shallow needling focused on the epidermal layer, followed by ampoule application.

3rd Layer: Skin Booster Ampoule Application

- Needling targets the basement membrane at the dermal-epidermal junction, followed by ampoule application.

4th Layer: Skin Booster Ampoule Application

- The ampoule is applied after needling, focusing on areas the patient particularly wishes to improve (e.g., pores, scars).

*3. Post-treatment Soothing Care

- We conclude the soothing care with a Jaun-go modeling pack to ensure comfort in the treated area.

At Kkeuthan Clinic, we use a four-step layering method to ensure that skin boosters are delivered broadly and evenly to the skin in a single treatment.

Kkeuthan Clinic's skin booster layering treatment is designed to reduce concerns such as bruising, swelling, incorrect drug injection, and hypersensitivity reactions, allowing for a more comfortable experience.

Absorption Method Using Kkeuthan Clinic's Layering Technique

JuveLook has characteristics that make it difficult to absorb by simply applying it to the skin surface. Therefore, we use

MTS (Microneedle Therapy System) and needle radiofrequency (Potenza RF) devices to apply a layering technique that aids in the skin's absorption of skin boosters.

The particle size of JuveLook skin booster is approximately 30-50μm, which allows for sufficient delivery into the skin when using MTS or Potenza RF. However, to minimize ampoule loss and ensure more effective delivery, we perform the treatment using a layering method.

MTS Layering Treatment Technique

MTS creates microscopic channels of approximately 150μm in the skin, paving the way for skin booster ampoules to be well absorbed.

We apply a 4-step layering process using MTS to enhance ampoule absorption.

Step 1: Epidermal Layer Priming Application

Step 2: Shallow Needling followed by Ampoule Application to the Epidermal Layer

Step 3: Ampoule Application to the Dermal-Epidermal Junction

Step 4: Concentrated Ampoule Application to Areas Requiring Improvement, such as Pores or Scars

After the treatment, soothing care, such as a Jaun-go modeling pack, is performed to reduce the burden of skin irritation or inflammatory reactions, ensuring a comfortable completion of the procedure.

Potenza RF Needle Radiofrequency Layering Treatment Technique

Potenza RF creates microscopic channels of approximately 180μm in the skin, then uses radiofrequency energy to contract these channels. This helps reduce fluid backflow (overflow) that can occur with conventional needle treatments, allowing for more precise delivery of JuveLook ampoules to the dermal layer and minimizing ampoule loss.

While there might be some ampoule loss compared to manual injection, it offers the advantage of more uniformly delivering the ampoule to the target dermal layer. Additionally, it helps reduce the discomfort of pain while promoting even absorption of the ampoule.

Similar to MTS, Potenza RF also allows for precise control of needle depth, enabling the application of a 4-step layering treatment technique.

At Kkeuthan Clinic, we appropriately combine and apply MTS and Potenza RF treatments tailored to each patient's individual skin condition and needs.

Why Kkeuthan Clinic Uses the Layering Treatment Method

JuveLook is fundamentally a skin booster supplied in powder form.

Therefore, before treatment, it is crucial to sufficiently hydrate it with saline to achieve the appropriate viscosity and stability.

If the treatment is performed by direct manual injection, insufficient hydration or imprecise control of injection depth can lead to the drug clumping in one spot, potentially forming nodules.

Furthermore, if the drug is injected into the subcutaneous fat layer instead of the target dermal layer, it may be difficult to achieve the expected improvement effects.

Even when injection procedures are performed consistently, completely ruling out the possibility of nodule formation is difficult. At Kkeut Clinic, we consider this, striving to enhance safety while still achieving the desired treatment effects.

Kkeut Clinic utilizes a 'layering technique' that covers everything from drug hydration to viscosity control, channel creation, and absorption methods. This is a customized treatment approach designed to ensure effective drug delivery, considering each individual's skin condition.

We believe it is right to pursue an approach that enhances treatment efficacy while reducing potential risks.

What is Juvelook Skinbooster?

Juvelook is a skin booster formulated with PDLLA (Poly-D,L-lactic acid) and hyaluronic acid (HA).

This treatment can help improve skin texture, pores, fine lines, and acne scars. It is known as a regenerative skin booster that induces the regeneration of autologous collagen and elastin in the dermis, thereby managing overall skin elasticity and density.

PDLLA has a smaller particle size than existing PLLA ingredients (e.g., Sculptra). This characteristic can contribute to improved absorption and a lower possibility of nodule formation. It is designed to be delivered deep into the skin, reducing the risk of inflammatory reactions or nodules, making it a viable option even for those with sensitive skin.

Juvelook contains the following ingredients:

PDLLA 42.5mg (an ingredient that helps regenerate autologous collagen in the skin)

Non-crosslinked hyaluronic acid 7.5mg (an ingredient that moisturizes the skin and helps improve its barrier)

When injected into the dermis, PDLLA activates fibroblasts, stimulating the production of collagen and elastin fibers.

Collagen is a key component affecting skin thickness and density, while elastin influences skin elasticity.

An increase in both these fibers can positively impact the resolution of overall skin concerns such as fine lines, enlarged pores, and reduced elasticity.

Furthermore, PDLLA can stimulate stem cells to promote the differentiation of new fibroblasts.

This is expected to contribute to improving existing cellular structures weakened by aging, thereby re-establishing the skin's inherent healthy structure.

Fibroblasts, which produce collagen and elastin fibers within the skin, become harder to replace with new cells as we age.

Juvelook Skinbooster can play a role in the formation of new fibroblasts instead of aged ones, thereby assisting in the long-term production of collagen and elastin fibers.

Who can consider this treatment?

• 
  
• 
  
• 01. Individuals experiencing discomfort due to reduced skin elasticity or enlarged pores.
• 
  
• 
  
• 
  
• 02. Individuals bothered by enlarged pores or acne scars.
• 
  
• 
  
• 
  
• 03. Individuals seeking natural, not excessive, improvement in skin volume.
• 
  
• 
  
• 
  
• 04. Individuals concerned about uneven skin texture or fine lines.
• 
  
• 
  
• 
  
• 05. Individuals who desire autologous collagen regeneration but are hesitant about injection procedures.
• 
  
• 
  
• 
  
• 06. Individuals expecting natural skin tightening and lifting effects.
• 
  
• 
  

What are the clinical study results for Juvelook treatment?

The dermal regenerative effects of PDLLA have been confirmed through several studies.

According to a report by Kwon et al. (Dermatologic Surgery, 2022), increased skin thickness, dermal density, and improved elasticity were observed in the group treated with PDLLA skin booster a total of 3 times at 4-week intervals.

Kim et al. (Journal of Cosmetic Dermatology, 2021) confirmed that PDLLA also participates in elastin production. This research suggests a broader range of fiber regeneration effects can be expected compared to existing collagen-focused products.

Han et al. (Lasers in Surgery and Medicine, 2020) reported that when treating patients with acne scars, the MTS-based absorption method was useful for drug delivery to the dermis and had a low probability of epidermal irritation or side effects.

A Message from Our Medical Team

Many first-time visitors to our clinic experience significant stress over even a single skin texture issue.

For example, they often express concerns about enlarged pores, rough skin texture, or makeup not applying well.

While these might seem minor to others, they can cause considerable psychological burden for the individual.

Our medical team recommends Juvelook treatment to those with such concerns.

This treatment can help refine skin texture, manage pores, and simultaneously contribute to activating the skin's natural regenerative power.

If you have ever been concerned about the pain of injection procedures or worried about drug loss,

you might consider consulting about Juvelook Skinbooster treatment utilizing Kkeut Clinic's layering technique.

Features of the Treatment

• 
  
• 
  
• 01. The combination of FDA-approved polymeric PLA and hyaluronic acid can help improve various skin concerns.
• 
  
• 
  
• 
  
• 02. By inducing autologous collagen production, you can expect gradual and natural changes over time after the treatment.
• 
  
• 
  
• 
  
• It helps improve skin elasticity and smooth out skin texture. It can also help reduce the appearance of fine lines and scars caused by acne.
• 
  
• 
  
• 
  
• This material is biodegradable and bioabsorbable. Over time, it naturally breaks down and is absorbed by the body, which helps reduce concerns about any residual substances remaining.
• 
  
•